Water Quality Testing Kits
Hach Company Total Hardness Test Strips 0-425 mg/L, 1000 tests, Individually Wrapped
Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trivalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. With Hach Water Quality Test Strips, technicians in the field can test many samples in only a few minutes, and make immediate evaluations on-site. No measuring, set-up, clean-up, or chemical handling are necessary. Hach test strips are also used in laboratories all over the world for pre-test screening-to detect the presence of materials that might interfere with lab testing. Strips are individually wrapped for maximum portability and stability. Contains 1,000 tests.
Hach Company Potassium Iodide Swiftest™ Bulk Dispenser, with Potassium Iodide Refill Vial
For total chlorine determination with the Autocat 9000 Chlorine Amperometric Titrator. Includes Swiftest dispenser and vial containing enough reagent for approximately 300 tests.
Hach Company TPTZ Iron Reagent Powder Pillows, 10 mL, pk/100
For low range Iron determination by the TPTZ method. Hach Method 8112. Range: 0.012 - 1.800 mg/L Fe. Sample Size: 10 mL. Pack of 100 Powder Pillows
Hach Company Alkaline Cyanide Reagent, 100 mL MDB
For determination of low level manganese by the PAN method. Hach method 8149. Range: 0.006 to 0.700 mg/L Mn. 100 mL Marked Dropping Bottle.
Hach Company Nitrite TNTplus Vial Test, LR (0.015-0.600 mg/L NO₂-N), 25 Tests
Nitrite TNTplus chemistry and your Hach spectrophotometer are engineered to simplify water analysis for accurate results, everytime.For determination of Nitrite Nitrogen by the Diazotization method. EPA compliant.
Hach Company SL1000 - PPA Portable Parallel Analyzer- Portable Colorimeter with USB
Complete more tests on site, get the results you need faster, allowing you to visit more sites in each shift. Perform up to four colorimetric and two probe-based measurements in parallel 75% faster than with other methods.The Hach SL1000 Portable Parallel Analyzer (PPA) performs the same tests with less than half the manual steps. Get highly accurate results, with less opportunity for errors, in a fraction of the time. Up to six parameters, tested in parallel. The SL1000 is a portable colorimeter that provides 75% faster testing in chloramination applications by using Chemkey reagents instead of powder pillows. All chemicals and processes are entirely contained inside the Chemkey.
Hach Company UniVer 3 Hardness Reagent, 28 g
Combined indicator and buffer for determination of total hardness by titration methods. 28 g bottle.
Hach Company Hardness indicator solution for HACH SP510, 1l, 1 mg/l
Hardness indicator solution, 1l, 1 mg/l
Hach Company Sulfide Reagent Set, Methylene Blue
For determination of Sulfide by the Methylene Blue Method, using Hach Method 8131 and visual test kits. Photometric range: 5 - 800 μg/L sulfide. Test kit ranges: 0.01 - 0.55 to 2.5 - 11.25 mg/L sulfide. Set contains 2 100-mL bottles each of Sulfide 1 and Sulfide 2 Reagents. Approximately 100 tests. For turbid samples, also order Bromine Water (221120) and Phenol Solution (211220).
Hach Company PAN Indicator Solution, 0.1%, 500 mL
For determination of low level manganese by the PAN method. Hach method 8149. Range: 0.006 to 0.700 mg/L Mn. 500 mL Bottle.
Cole-Parmer Blue Dye Tablets, 200 Tablets
Dyes diffuse rapidly in water, producing a vivid, easy-to-see color. Excellent for identifying diffusion and dispersion patterns, rates of flow, discharge locations, seepage areas, sea marking, and more. Use blue dye to brighten murky ponds and other landscaped waters. Minimum detectable concentration of all dyes in clear water is 1 ppm. Available in tablets, liquid, or powder. Quick dissolving tablets are easy to handling with less mess than other forms. They are perfect for applications such as storm lines, cooling and plumbing systems, and sewer lines. Choose liquid for applications such as metered input, flow/dilution/disperation rate assessment, septic inspections, or fluoremetric dye tests. Powder is well-suited for large applications where liquid is undesirable such a cooling towers, lakes, rivers, and ponds, or power plant piping.
Hach Company Microfil Funnel & Filter, 100 mL, 0.45 µm 47 mm White Gridded (Millipore)
Designed to eliminate cleaning and sanitization of filter funnels between uses. Graduated (20, 50, and 100 mL) 100 mL funnels are sterile and ready-to-use. Funnel creates leak-proof seal when seated onto Microfil Stand Alone Support. Excellent for testing water samples from potable, non-potable, source, ambient, industrial, food, beverage, pharmaceutical and wastewater sources. Microfil funnels come with 150 Millipore filters (white; gridded; cellulose and mixed ester composition; 0.45 μm pore size; 47 mm diamter; sterile; individually packed). Microfil V includes integrated filter for added convenience and can be used with standard No. 8 stopper on any filter holder or manifold.